http://arxiv.org/abs/1801.04204
ASPIICS is a novel externally occulted coronagraph that will be launched onboard the PROBA-3 mission of ESA. The external occulter (EO) will be placed on one satellite ~150 m ahead of the second satellite with an optical instrument. During part of each orbit, the satellites will fly in a precise formation, constituting a giant externally occulted coronagraph. Large distance between the EO and the primary objective will allow observations of the white-light solar corona starting already from ~1.1RSun. We analyze influence of shifts of the satellites and misalignments of optical elements on diffracted light. Based on the quantitative influence of misalignments on diffracted light, we will provide a “recipe” for choosing the size of the internal occulter (IO) to achieve a trade-off between the minimal height of observations and sustainability to possible misalignments. We implement a numerical model of the diffracted light and its propagation through the optical system, and compute intensities of diffracted light throughout the instrument. Our numerical model extends axi-symmetrical model of Rougeot et al. 2017 to non-symmetrical cases. The computations fully confirm main properties of the diffracted light obtained from semi-analytical consideration. Results: relative influences of various misalignments are significantly different. We show that: the IO with R=1.1RSun is large enough to compensate possible misalignments in ASPIICS, apodizing the edge of the IO leads to additional suppression of the diffracted light. Conclusions: the most important misalignment is the tilt of the telescope WRT the line connecting the center of the EO and the entrance aperture. Special care should be taken to co-align the EO and the coronagraph, i.e. co-aligning the diffraction fringe from the EO and the IO. We suggest that the best orientation strategy is to point the coronagraph to the center of the EO.
S. Shestov and A. Zhukov
Mon, 15 Jan 18
59/59
Comments: 13 pages, 15 figures