http://arxiv.org/abs/2112.12813
Deformable Mirrors (DMs) have wide applications ranging from astronomical imaging to laser communications and vision science. However, they often require bulky multi-channel cables for delivering high power to their drive actuators. A low powered DM which is driven in a contactless fashion could provide a possible alternative to this problem.Here, we present a photo-magnetically actuated deformable mirror (PMADM) concept which is actuated in a contactless fashion by a permanent magnet and low power laser heating source. This paper presents the laboratory demonstration of prototype optical surface quality, magnetic control of focus, and COMSOL simulations of its precise photo-control. The PMADM prototype is made of a magnetic composite (polydimethylsiloxane [PDMS] + ferromagnetic $\text{CrO}_\text{2}$) and an optical-quality substrate layer and is 30.48 mm $\times$ 30.48 mm $\times$ 175 $\mu$ m in dimension with an optical pupil diameter of 8 mm. It deforms to 5.76 $\mu$ m when subjected to a 0.12 T magnetic flux density and relaxes to 3.76 $\mu$ m when illuminated by a 50 mW laser. A maximum stroke of 8.78 $\mu$ m before failure is also estimated considering a 3x safety factor. This works also includes simulation of astigmatism generation with the PMADM, a first step in demonstrating control of higher order modes. A fully developed PMADM can have potential application for wavefront corrections in vacuum and space environments.
A. Jha, E. Douglas, M. Li, et. al.
Tue, 28 Dec 21
46/55
Comments: 19 pages, 18 figures
You must be logged in to post a comment.